|Product Name:||Single-phase Run Asynchronous Outdoor Welling Air Conditioner Motor AC Motor||Insulation Class:||B|
|Bearing:||Ball Bearing||IP Class:||IP21|
single phase fan motor,
single phase asynchronous motor
Run Asynchronous Air Cooler Fan Motor / Outdoor Welling Air Conditioner Motor AC Motor
Product features of Air Cooler Fan Motor
1-Shaft dia or length can be any as customers needs.
2-Stator thickness can be any from 10mm to 50mm.
3-Mounting holes size and distance can be any as customers needs
4-Brackets can be either metal or aluminum. Its height can be changed.
5-Motor rotation direction can be CW or CCW.
Application of Air Cooler Fan Motor
YDK series motors are used for Range hood
Air Conditioner, Air Cooler
ventilator and UV sterilizer disinfection equipment
Type of bearing ＆ sleeve bearing or ball bearing
All of these questions can easily be answered by examining the original motor. Not matching any one of these specifications can potentially cause problems with the motor or the system in which it is used. It is usually best to bring the original motor to the supply house to match its replacement. This enables the counter person to assist in obtaining the correct replacement.
Once the replacement motor is installed, it is a good practice to measure the amp draw of the new motor and verify that it is operating within its amperage range. The motor should also be examined after approximately 2 hours of run time to ensure that there are no other problems. This may not be practical at times, but it should be done whenever possible.
Contact Person: Vicky